Tutorial: Generic Angel Wings
Lets Make some Angel Wings!!
1 ) Prepare the Ingredients.
Tip: Use a 18x8cm Cardboard for the backbone of the wing.
2 ) Make Your Measurements!
Span of Wing: Aprox 17cm
Mid of Wing: Aprox 4cm
Length of Feather: 2.3cm
Bottom of Feather: 0.4cm
Middle of Feather: 0.7cm
3 ) Cut the slit to mark the middle of the wing. (Tip: Fold the 18x8cm Cardboard into half on the length)
4 ) Cut the Cardboard into the Shape of the wing.
5 ) Mark the exact middle of the wing, and the lines that the “feathers” will be pasted on… Lines should be 1/2 the length of a feather.
6 ) Apply the Glue in the center of the line, and paste the feathers accordingly.
—- Optional Steps —-
7 ) Mix the Red paint to apply on the wings.
8 ) Apply on the circumference on the wing.
9 ) Cut a hole in the middle of the wing so that the figma stand can “poke” through.
10 ) Wait for the whole thing to dry.
—- Finished!! —-
Well, IMHO these wings look good on Nendos too!